Image not available
Industrial manufacturing
Horizontal Carcass Hair Trimming Automatic Conveyor Machinery
<p>This Horizontal Carcass Hair Trimming Automatic Conveyor Machinery is specified for one practical job: a carcass‑finishing station that removes remaining hair or surface residue after primary dehairing. A reliable installation begins with correct interface dimensions and a realistic duty cycle. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. F…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
This Horizontal Carcass Hair Trimming Automatic Conveyor Machinery is specified for one practical job: a carcass‑finishing station that removes remaining hair or surface residue after primary dehairing. A reliable installation begins with correct interface dimensions and a realistic duty cycle. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
The carcass passes rotating polishing elements, trimming positions or a controlled flame zone. Exposure is limited to the surface treatment needed before final washing and clean‑line entry. The upstream machine must not feed faster than the receiving station can clear.
Main Features
More uniform carcass finish
Adjustment for carcass size and line speed
Contained residue or exhaust
Guards around moving or hot parts
Easy access for cleaning
Integration with the overhead rail
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P211 |
| Application | Which used to collect dehaired pig carcass for hair trimming |
| Rated voltage / phase / frequency | 380v / 3p / 50hz |
| Power | 1.5Kw |
| Chain pitch | 100mm |
| Out size | 5000*1550*500(L*W*H) |
| Component and material | 1) 38*38*2mm stainless square steel support 2) High‑quality carbon steel sprockets, plate chain, drive shaft 3) 60*30*2mm stainless square steel convey plate 4) Driving & tension device |
| Quotation control | Specify line speed, carcass range, upstream dehairing result, required finish, exhaust or gas supply, fire controls and downstream washer position. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is pig slaughter lines between primary dehairing and final carcass washing. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 200 pigs per hour places the horizontal carcass hair trimming automatic conveyor machinery between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
More from this supplier
HUATAO GROUP LTD.
