Image not available
Industrial manufacturing
Pig Carcass Splitting Saw Sterilizer
<p>The Pig Carcass Splitting Saw Sterilizer is designed as a dedicated station that cleans and heat‑treats a slaughter tool between carcasses or at scheduled intervals. It should be treated as part of the process flow, not as a stand‑alone catalogue item. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, mate…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
The Pig Carcass Splitting Saw Sterilizer is designed as a dedicated station that cleans and heat‑treats a slaughter tool between carcasses or at scheduled intervals. It should be treated as part of the process flow, not as a stand‑alone catalogue item. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
The saw or shear enters a chamber or holder where water reaches the specified sanitation temperature and contacts the working surfaces. Drainage removes used water before the tool returns to service. During commissioning, the sequence should be tested first without product and then under a representative load.
Main Features
Holder matched to the actual tool
Controlled hot‑water contact
Safe insertion and removal
Drainable stainless enclosure
Temperature monitoring provision
Access for descaling and cleaning
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P502‑VI |
| Application | Which main used for pig carcass band splitting saw sterilizing |
| Size | 1060*360*1200mm(L*W*H) |
| Material | 1) Stainless steel 2) Thickness: 2mm |
| Quotation control | State the tool model, blade or jaw dimensions, water temperature requirement, recovery time, inlet pressure, drain size and electrical supply if heating is included. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is splitting saw, head shear and hand‑tool stations that require documented between‑cycle hygiene. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 60 pigs per hour places the pig carcass splitting saw sterilizer between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
More from this supplier
HUATAO GROUP LTD.
