Image not available
Industrial manufacturing
Arm-type Pig Carcass Unloading Device
<p>The Arm‑type Pig Carcass Unloading Device is designed as a transfer device that releases a shackle, hook or carcass at a defined point on the overhead handling route. It should be treated as part of the process flow, not as a stand‑alone catalogue item. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, mat…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
The Arm‑type Pig Carcass Unloading Device is designed as a transfer device that releases a shackle, hook or carcass at a defined point on the overhead handling route. It should be treated as part of the process flow, not as a stand‑alone catalogue item. The HT listing supplies reference data for the offered arrangement; those figures are reproduced below for comparison. For export quotations, confirm voltage, materials, guarding, spare parts and documentation before the purchase order is released.
Working Principle
A guide, fork or actuated arm engages the moving carrier. At the discharge point it changes the carrier path or lifts the load clear, allowing gravity or a controlled mechanism to place the item on the next conveyor, table or process machine. During commissioning, the sequence should be tested first without product and then under a representative load.
Main Features
Repeatable release at the hand‑off point
Rail geometry matched to the existing line
Guarded moving parts
Serviceable bearings and actuators
Manual recovery after a stoppage
Stainless or protected structural options
Technical Specifications
| Parameter | Reference Value / Buyer Check |
| Model | HT‑P510 |
| Rated voltage / phase / frequency | 380v / 3p / 50hz |
| Power | 4kw |
| Working principle | hydraulic |
| Radius of rotation | 2m |
| Capacity | 200‑300 carcass per hour |
| Component and material | 1)‑ Stainless steel base 2)‑ Stainless steel rotate arm and fork 3)‑ Oil cylinder 4)‑ Hydraulic pressure station 5)‑ Hydraulic control system and soft pipe 6)‑Low pressure control switches |
| Quotation control | Provide rail section, travel direction, carrier drawing, load range, line speed, discharge height and the exact receiving equipment. A site video is useful for retrofit work. |
Reference configuration transcribed and normalized from the cited HT product page; confirm the final quotation and approved drawing.
Application
The usual application is rail‑to‑table, rail‑to‑scald and line‑end transfer points in pig slaughter and carcass handling systems. It can be specified for a new line or adapted to a retrofit, provided that the existing supports, working heights, utilities and control signals are measured on site. Plants handling several pig sizes should state the full range rather than quoting only an average.
Application Case
Illustrative reference case-A regional pork processor planning for 60 pigs per hour places the arm‑type pig carcass unloading device between the relevant upstream and downstream stations. Before fabrication, the project team freezes the interface drawing, utility points and operator access. The acceptance check covers dry running, representative‑load operation, emergency stops, cleaning access and a spare‑parts handover.
Advantages
1. Fits into a defined process stage, which makes line balancing and internal linking easier.
2. Project‑specific dimensions reduce awkward field modifications at installation.
3. Service points and replaceable wear parts can be agreed before shipment.
4. Hygiene and drainage requirements can be reviewed with the equipment layout.
5. Reference source data remains visible instead of being converted into unsupported marketing claims.
More from this supplier
HUATAO GROUP LTD.
