Image not available
Industrial manufacturing
Horizontal Sheep and Goat Carcass Dehairing Machine
<p style="margin-top: 0px; margin-bottom: 14px; font-family: Poppins, sans-serif; line-height: 1.75; color: rgb(68, 68, 68);">The Horizontal Sheep and Goat Carcass Dehairing Machine is designed for whole‑carcass hair removal after scalding. A horizontal rotating shaft carries rubber working bars that contact and turn the carcass inside the chamber. This arrangement is aimed at processors producing skin‑on sheep or g…
SupplierHUATAO GROUP LTD.www.slaughterpro.com
Source categories
About this product
Product information from the supplier.
Product Overview
The Horizontal Sheep and Goat Carcass Dehairing Machine is designed for whole‑carcass hair removal after scalding. A horizontal rotating shaft carries rubber working bars that contact and turn the carcass inside the chamber. This arrangement is aimed at processors producing skin‑on sheep or goat carcasses rather than removing the hide in a conventional dressing line.
The reference machine uses a 7.5 kW drive and has an effective working length of 1,800 mm. Its listed cycle time is 30–40 seconds and the stated dehairing rate is at least 92%. The source gives two inconsistent throughput figures—20–30 head per hour and a maximum of 100 head per hour. Buyers should not use either figure for line design until the supplier explains the batch size and test conditions.
Working Principle
A properly scalded carcass is placed in the horizontal chamber and the loading guard is secured. The motor rotates the central shaft and rubber bars sweep against the carcass, turning it so that friction reaches different surfaces. Loosened hair falls through or is flushed toward the collection area. After the preset 30‑40 second cycle, the shaft stops and the carcass is discharged for visual inspection and manual finishing. The chamber, shaft and bars are opened for thorough cleaning after production.
Main Features
Horizontal batch format for whole sheep or goat carcasses
Rubber working bars mounted on a powered central shaft
30‑40 second reference dehairing cycle
Stated dehairing result of at least 92%
Galvanized or stainless frame and shaft options
7.5 kW three‑phase motor
Technical Specifications
Reference configuration from the source listing. Confirm final utilities, materials, interfaces and performance in the supplier quotation.
| PARAMETER | REFERENCE SPECIFICATION |
| Reference model | HT‑C211‑I |
| Electrical supply | 380 V / 50 Hz / 3 phase |
| Installed power | 7.5 kW |
| Overall dimensions | 1,700 × 1,580 × 1,200 mm |
| Effective dehairing length | 1,800 mm — verify against stated overall length |
| Cycle time | 30‑40 seconds |
| Stated dehairing rate | ≥92% |
| Capacity | Source conflict: 20‑30 head/hour and maximum 100 head/hour |
| Frame and shaft | Galvanized steel or stainless steel |
| Working elements | Rubber bars |
Application
The machine is intended for specialized sheep and goat processes that retain the skin and therefore require whole‑carcass scalding and hair removal. It is not a substitute for a hide puller. The line must provide a compatible scalding stage, safe loading device, hair separation from effluent, finishing station and product specification that permits skin‑on processing under local rules.
Reference Application Case
Reference application: a small goat processor develops a skin‑on product line
Carcasses are scalded under a validated time‑temperature program, drained briefly and then loaded one at a time into the horizontal dehairer. An operator inspects the discharge and removes residual hair at a finishing table. Hair is trapped in a removable screen before wastewater enters the drain. During acceptance testing, the buyer measures cycle time, finish quality and carcass damage on its normal weight range before setting the production rate.
Advantages
1. Mechanizes whole‑carcass hair removal for skin‑on products
2. Short reference cycle supports batch production
3. Rubber bars provide flexible contact around the carcass
4. Openable chamber allows inspection of the working shaft
5. Frame‑material options can be aligned with washdown and budget needs
More from this supplier
HUATAO GROUP LTD.
