Image not available
Industrial manufacturing
Combustible Gas Alarm Controller(JH-FII, JH-FD, JH-FK)
<p>The combustible gas alarm controller is applied in places where combustible gases are produced, transported, stored, and filled. It collects the concentration of combustible gases in the air detected by point type combustible gas detectors (4-20mA signals).<br/></p><p>When the set alarm value is reached, corresponding alarm signals and control signals are output to prompt on-site personnel to take timely safety m…
SupplierJiangsu Jihua Electronic Technology Co., Ltdwww.jhdetect.com
Source categories
About this product
Product information from the supplier.
Technical Parameter
Item | Specification |
Operating Voltage | 220V AC±15% |
Backup Power | 12V DC/1.3Ah×2 |
Display Mode | LCD display |
Supported Detector Quantity | 1-2 channels |
Communication Mode | 4~20mA |
Power Consumption | ≤10W |
Concentration Unit | %LEL, ppm, %VOL, mg/m³ |
Alarm Type | High & low limit alarm, fault alarm |
Relay Output | 2 groups linkage, 1A 220VAC |
Operating Temperature | -10℃~55℃ |
Operating Humidity | ≤95%RH (Non-condensing) |
Installation Method | Wall mounted |
Overall Dimension | 264×86×324mm |
Features
Using high-speed core processors, running efficiently and stably;
Can be paired with detectors that can connect 4-20mA signals;
The controller adopts multi-level signal filtering processing to stabilize the signal data;
Built in 2 sets of relay outputs;
Can output RS485/Modbus RTU signals and connect to upper level systems such as computers;
Has the function of maintaining alarm status;
Support alarm record storage and query function, with a capacity of 1000 records;
Modular design, each circuit works independently.
More from this supplier
Jiangsu Jihua Electronic Technology Co., Ltd
