Image not available
New energy
KNS 22.2V 22000mAh 6S UAV Battery China Factory Suppliers
High-capacity 22.2V 22000mAh 6S battery for professional UAVs. Sourced from a leading China factory, our power solutions offer extended flight times and industrial reliability. Discover why we are the preferred suppliers for heavy-lift and agricultural drones.
SupplierBeijing KNS New Energy Technology Co.,Ltd.www.knsbattery.com
Source categories
About this product
Product information from the supplier.
The KNS 22.2V 22000mAh 10C 6S battery is a high-performance power solution engineered specifically for professional UAVs and heavy-lift drones. Featuring an impressive energy density of 270Wh/kg, this battery balances massive capacity with a lightweight profile, ensuring that your drone maximizes its payload potential without sacrificing flight dynamics.
Designed for industrial-grade reliability, it provides the stable voltage and consistent discharge rates required for demanding missions such as agricultural surveying, cargo delivery, and critical infrastructure inspection. With an extended cycle life of 600 cycles, it represents a sustainable and cost-effective energy investment for commercial drone operators worldwide.
Detailed Parameters
| Model | KNS-270-22AH6S | Voltage | 22.2V |
|---|---|---|---|
| Capacity | 22000mAh | Continuous Discharge | 3C |
| Max Discharge | 10C | Energy Density | 270Wh/kg |
| Total Energy | 488.4Wh | Weight | 1930g |
| Dimensions | 2178968mm / 1957564mm | Cycle Life | 600 cycles |
Key Advantages
Enhanced Safety
Built with premium cells and rigorous testing to ensure stable voltage under load and high resistance to thermal runaway.
Extended Endurance
22000mAh high capacity enables 40+ minutes of flight time for hexacopters with 3-5kg payloads.
High Energy Density
At 270Wh/kg, this battery minimizes dead weight to maximize operational efficiency and payload capacity.
Stable Power Output
Consistent 3C-10C discharge rates prevent premature power drop-off during complex flight routes.
Wide Temp Range
Optimized for extreme environments, operating reliably from -20°C up to 55°C.
Long Cycle Life
Engineered for 600 cycles, significantly reducing the total cost of ownership for fleet operators.
Product Gallery
Management Platforms
Payload Optimization
Perfectly calibrated for drones carrying 3-5kg, balancing weight and energy.
Thermal Management
Advanced electrolyte stability for safe operation between -20°C and 55°C.
Discharge Control
Strict C-rate management to preserve cell longevity and safety.
Charging Protocols
Supports standard CC/CV charging with recommended 0.5C-1C rates.
Storage Strategy
Low self-discharge rate; recommended storage at 40-60% state of charge.
Pre-flight Check
Fast cell balance verification (max diff < 0.05V) for mission safety.
Investment Return Comparison
| Metric | Standard LiPo | KNS Solid-State Li-Ion |
|---|---|---|
| Cycle Life | 200 - 300 Cycles | Up to 600 Cycles |
| Energy Density | 150 - 200 Wh/kg | 270 Wh/kg |
| Flight Time | Baseline | +25% to 40% Increase |
| Safety Level | High Volatility | Enhanced Stability |
| Op. Temperature | Narrow Range | -20°C to 55°C |
Frequently Asked Questions
Q: What is the main advantage of solid-state batteries for UAVs?
Solid-state batteries offer significantly higher energy density (Wh/kg) and safety compared to traditional liquid LiPo batteries, allowing drones to fly longer or carry heavier payloads with a lower risk of fire.
Q: How should I store these batteries for long-term use?
Store batteries at a 40-60% state of charge (approximately 3.8V to 3.85V per cell) in a cool, dry environment to minimize degradation.
Q: Can these batteries operate in freezing temperatures?
Yes, the KNS batteries are designed for discharge in temperatures as low as -20°C. However, charging should only be performed above 0°C to maintain cell health.
Q: What is the recommended charging rate?
We recommend a charge rate between 0.5C and 1C using a compatible CC/CV charger. Lower charging rates generally extend the overall cycle life of the battery.
Q: How do I know if the battery needs replacement?
Replacement is recommended if you notice physical swelling, an increase in internal resistance, or if the cell voltage difference exceeds 0.05V during a balanced charge.
Q: Are these compatible with standard XT90S connectors?
Yes, this specific model is equipped with XT90S plugs to ensure a secure, high-current connection suitable for industrial UAV power systems.
Ready to Upgrade Your Drone's Endurance?
Contact UsMore from this supplier
Beijing KNS New Energy Technology Co.,Ltd.
