Image not available
Industrial manufacturing
Slagging Pulley（Heavy Duty)
Slagging Pulley is to clean the slag and materials stuck to the non-working surface of the conveyor belt. The drum are welded with steel plate, which applies to the conveyors with wide belt, heavy load and large conveying capacity.
SupplierYanshan Aohua Machinery Equipment Manufacture Limited Companywww.idleraohua.com
Source categories
About this product
Product information from the supplier.
Detail Description
Slagging Pulley usually is installed at the position of tail pulley, tension take-up pulley or snub pulley，Its function is to remove the material stuck to the conveyor belt, The removed material will fall down from the inner cone surface of the pulley.
The structural design of slagging pulley is unique .The pulley drum is welded by automatic welding equipment to ensure high welding quality and high welding strength . The drum is annealed at medium temperature, the residual stress is small, and the service life is long.
Product Parameters
Parameters for Belt Conveyor Slagging Pulley(Heavy Duty) | |||
Pulley Type | Belt Width(mm) | Outside Diameter(mm) | Length(mm) |
Non-driving pulley | 500 | 500~630 | The length of the drum is greater than the width of the belt 150-200mm |
650 | 500~630 | ||
800 | 500~1000 | ||
1000 | 500~1600 | ||
1200 | 500~1600 | ||
1400 | 500~1600 | ||
1600 | 500~1600 | ||
1800 | 500~1800 | ||
2000 | 500~1800 | ||
2200 | 630~1800 | ||
2400 | 800~2000 | ||
Specifications can be customized according to requirements | |||
Diagrammatic Drawings and Parameters
Diagrammatic Drawings and Parameters for Slagging Pulley（Heavy Duty):
Belt Width (mm) | Φ1 | Φ2 | L | L1 | L2 | D1 | D2 | D3 | t1 | a | m | h | b | n | u | v | Remarks |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
More from this supplier
Yanshan Aohua Machinery Equipment Manufacture Limited Company
